KMT precision nut

The KMT precision nut have three locking pins equally spaced around, so that it can be locked onto the shaft by tight the grub screws. The end face of three brass pins are machined to match the shaft thread. When tightened to the recommended torque, the locking pin can provide sufficient friction between the ends and the unloaded thread flanks to prevent the nut from loosening under normal operating conditions

Nuts up to the dimensions KMT 15 M 75×2 has an additional branch and can therefore also be tightened with a wrench flats.

Available from stock in diameters ranging from M10 to M100, both in steel and stainless steel, with other sizes available to order.

Please contact us with your requirements to further your enquiry.

KMT   0M10x0.75212823144224
KMT   1M12x1233025144227
KMT   2M15x1263328164230
KMT   3M17x1293733185234
KMT   4M20x1324035185236
KMT   5M25x1.5364439205241
KMT   6M30x1.5414944205246
KMT   7M35x1.5465449225250
KMT   8M40x1.55665592262.560
KMT   9M45x1.56170642262.565
KMT   10M50x1.5657568257370
KMT   11M55x2748578257380
KMT   12M60x27890822683.585
KMT   13M65x28395872883.590
KMT   14M70x288100922883.595
KMT   15M75x293105972883.5100
KMT   16M80x2981101003283.5
KMT   17M85x210712011032104
KMT   18M90x211212511532104
KMT   19M95x211713012032104
KMT   20M100x212213512532104