DIN 70852 spanner locknut
DIN 70852 slotted spanner locknut can be used for adjusting the amount of play or for securing shaft-hub connections in an axial direction, for example. Comparing KM nut, DIN 70852 nut is more space saving. With more thread sizes, these nuts are more flexible.Available from stock in diameters ranging from M10 to M100, both in steel and stainless steel, with other sizes available to order.Please contact us with your requirements to further your enquiry.
| Thread | Dh12 | d-0.3 | Bh11 | n+0.1 | mc11 | No. Notches | Weight ~ kgs. |
| M10x1 | 20 | 16 | 5 | 1.8 | 4.5 | 4 | 0.007 |
| M12x1.5 | 22 | 18 | 6 | 1.8 | 4.5 | 4 | 0.01 |
| M14x1.5 | 24 | 20 | 6 | 1.8 | 4.5 | 4 | 0.014 |
| M15x1.5 | 28 | 23 | 6 | 2.3 | 5.5 | 4 | 0.018 |
| M16x1.5 | 28 | 23 | 6 | 0.3 | 5.5 | 4 | 0.016 |
| M17x1.5 | 30 | 25 | 6 | 2.3 | 5.5 | 4 | 0.019 |
| M18x1.5 | 30 | 25 | 6 | 2.3 | 5.5 | 4 | 0.017 |
| M20x1.5 | 32 | 27 | 6 | 2.3 | 5.5 | 4 | 0.019 |
| M22x1.5 | 36 | 30 | 7 | 2.8 | 6.5 | 4 | 0.028 |
| M24x1.5 | 38 | 32 | 7 | 2.8 | 6.5 | 4 | 0.03 |
| M25x1.5 | 40 | 34 | 7 | 2.8 | 6.5 | 4 | 0.039 |
| M26x1.5 | 40 | 34 | 7 | 2.8 | 6.5 | 4 | 0.032 |
| M28x1.5 | 42 | 36 | 7 | 2.8 | 6.5 | 4 | 0.035 |
| M30x1.5 | 44 | 38 | 7 | 2.8 | 6.5 | 4 | 0.037 |
| M32x1.5 | 48 | 41 | 8 | 3.3 | 7 | 4 | 0.052 |
| M35x1.5 | 50 | 43 | 8 | 3.3 | 7 | 4 | 0.051 |
| M38x1.5 | 54 | 47 | 8 | 3.3 | 7 | 4 | 0.06 |
| M40x1.5 | 56 | 49 | 8 | 3.3 | 7 | 4 | 0.063 |
| M42x1.5 | 60 | 52 | 8 | 3.8 | 8 | 4 | 0.075 |
| M45x1.5 | 62 | 54 | 8 | 3.8 | 8 | 6 | 0.07 |
| M48x1.5 | 65 | 57 | 8 | 3.8 | 8 | 6 | 0.075 |
| M50x1.5 | 68 | 60 | 8 | 3.8 | 8 | 6 | 0.084 |
| M52x1.5 | 70 | 62 | 8 | 3.8 | 8 | 6 | 0.088 |
| M55x1.5 | 75 | 67 | 8 | 3.8 | 8 | 6 | 0.106 |
| M60x1.5 | 80 | 71 | 9 | 4.3 | 11 | 6 | 0.123 |
| M65x1.5 | 85 | 76 | 9 | 4.3 | 11 | 6 | 0.132 |
| M70x1.5 | 90 | 81 | 9 | 4.3 | 11 | 6 | 0.142 |
| M75x1.5 | 95 | 86 | 10 | 4.3 | 11 | 6 | 0.169 |
| M80x1.5 | 100 | 91 | 10 | 4.3 | 11 | 6 | 0.18 |
| M85x1.5 | 108 | 99 | 10 | 4.3 | 11 | 6 | 0.23 |
| M90x1.5 | 112 | 103 | 10 | 4.3 | 11 | 6 | 0.229 |
| M95x1.5 | 118 | 109 | 10 | 4.3 | 11 | 6 | 0.256 |
| M100x1.5 | 125 | 116 | 10 | 4.3 | 11 | 6 | 0.229 |
