KMTA precision nut
The KMTA precision nut have three locking pins equally spaced around, so that it can be locked onto the shaft by tight the grub screws. The end face of three brass pins are machined to match the shaft thread. When tightened to the recommended torque, the locking pin can provide sufficient friction between the ends and the unloaded thread flanks to prevent the nut from loosening under normal operating conditionsAvailable from stock in diameters ranging from M25 to M100, both in steel and stainless steel, with other sizes available to order.Please contact us with your requirements to further your enquiry.
| Product | Thread | d2 | d3 | d4 | B | J1 | J2 | N1 | N2 |
| KMTA 5 | M25x1.5 | 42 | 35 | 26 | 20 | 32.5 | 11 | 4.3 | 4 |
| KMTA 6 | M30x1.5 | 48 | 40 | 32 | 20 | 40.5 | 11 | 4.3 | 5 |
| KMTA 7 | M35x1.5 | 53 | 47 | 38 | 20 | 45.5 | 11 | 4.3 | 5 |
| KMTA 8 | M40x1.5 | 58 | 52 | 42 | 22 | 50.5 | 12 | 4.3 | 5 |
| KMTA 9 | M45x1.5 | 68 | 58 | 48 | 22 | 58 | 12 | 4.3 | 6 |
| KMTA 10 | M50x1.5 | 70 | 63 | 52 | 24 | 61.5 | 13 | 4.3 | 6 |
| KMTA 11 | M55x1.5 | 75 | 70 | 58 | 24 | 66.5 | 13 | 4.3 | 6 |
| KMTA 12 | M60x1.5 | 84 | 75 | 62 | 24 | 74.5 | 13 | 5.3 | 6 |
| KMTA 13 | M65x1.5 | 88 | 80 | 68 | 25 | 78.5 | 13 | 5.3 | 6 |
| KMTA 14 | M70x1.5 | 95 | 86 | 72 | 26 | 85 | 14 | 5.3 | 8 |
| KMTA 15 | M75x1.5 | 100 | 91 | 77 | 26 | 88 | 13 | 6.4 | 8 |
| KMTA 16 | M80x2 | 110 | 97 | 83 | 30 | 95 | 16 | 6.4 | 8 |
| KMTA 17 | M85x2 | 115 | 102 | 88 | 32 | 100 | 17 | 6.4 | 8 |
| KMTA 18 | M90x2 | 120 | 110 | 93 | 32 | 108 | 17 | 6.4 | 8 |
| KMTA 19 | M95x2 | 125 | 114 | 98 | 32 | 113 | 17 | 6.4 | 8 |
| KMTA 20 | M100x2 | 130 | 120 | 103 | 32 | 118 | 17 | 6.4 | 8 |
