DIN 1804
TypesType W: Steel, not hardened@Type WNI: Stainless Steel, not hardenedType H: Steel, hardened@Type W
Steel
- Tensile strength class 5
- not hardened
- blackened@Type WNI
Stainless Steel AISI 304 - not hardened@Type H
Steel
- Tensile strength class 5hardened HRC 60 ± 2 (thread not hardened)@Mating surface ground or fine turned
INFORMATION
On slotted locknuts DIN 1804 the ground surface d3 stands proud
and should be used as a mating surface.@
Steel
- Tensile strength class 5
- not hardened
- blackened@Type WNI
Stainless Steel AISI 304 - not hardened@Type H
Steel
- Tensile strength class 5hardened HRC 60 ± 2 (thread not hardened)@Mating surface ground or fine turned
INFORMATION
On slotted locknuts DIN 1804 the ground surface d3 stands proud
and should be used as a mating surface.@
D1 | D2 | D3 | b | h | t | z | Kg/100 |
M 10x1,0 | 25 | 20 | 5 | 6 | 2 | 0,5 | 1,74 |
M12x1,5 | 28 | 23 | 5 | 6 | 2 | 0,5 | 2,17 |
M 14x1,5 | 30 | 25 | 5 | 7 | 2 | 0,5 | 2,86 |
M 16x1,5 | 32 | 27 | 5 | 7 | 2 | 0,5 | 3,14 |
M 18x1,5 | 34 | 28 | 6 | 8 | 2,5 | 0,5 | 3,8 |
M 20x1,5 | 36 | 30 | 6 | 8 | 2,5 | 0,5 | 4,13 |
M 22x1,5 | 40 | 34 | 6 | 9 | 2,5 | 0,5 | 5,9 |
M 24x1,5 | 42 | 36 | 6 | 9 | 2,5 | 0,5 | 6,3 |
M 26x1,5 | 45 | 38 | 7 | 10 | 3 | 0,5 | 7,82 |
M 28x1,5 | 50 | 43 | 7 | 10 | 3 | 0,5 | 10,1 |
M 30x1,5 | 50 | 43 | 7 | 10 | 3 | 0,5 | 9,35 |
M 32x1,5 | 52 | 45 | 7 | 11 | 3 | 0,5 | 10,8 |
M 35x1,5 | 55 | 48 | 7 | 11 | 3 | 0,5 | 11,7 |
M 38x1,5 | 58 | 50 | 8 | 11 | 3,5 | 0,5 | 12,3 |
M 40x1,5 | 62 | 54 | 8 | 12 | 3,5 | 0,5 | 15,9 |
M 42x1,5 | 62 | 54 | 8 | 12 | 3,5 | 0,5 | 14,7 |
M 45x1,5 | 68 | 60 | 8 | 12 | 3,5 | 0,5 | 18,1 |
M 48x1,5 | 75 | 67 | 8 | 13 | 3,5 | 0,5 | 25,3 |
M 50x1,5 | 75 | 67 | 8 | 13 | 3,5 | 0,5 | 23,8 |
M 52x1,5 | 80 | 70 | 10 | 13 | 4 | 0,5 | 27,5 |
M 55x1,5 | 80 | 70 | 10 | 13 | 4 | 0,5 | 25,1 |
M 58x1,5 | 90 | 80 | 10 | 13 | 4 | 0,5 | 36 |
M 60x1,5 | 90 | 80 | 10 | 13 | 4 | 0,5 | 34,1 |
M 62x1,5 | 95 | 85 | 10 | 14 | 4 | 0,5 | 42,6 |
M 65x1,5 | 95 | 85 | 10 | 14 | 4 | 0,5 | 39,4 |
M 68x1,5 | 100 | 90 | 10 | 14 | 4 | 0,5 | 44,4 |
M 70x1,5 | 100 | 90 | 10 | 14 | 4 | 0,5 | 41,8 |
M 72x1,5 | 110 | 100 | 10 | 14 | 4 | 0,5 | 57,7 |
M 75x1,5 | 110 | 100 | 10 | 14 | 4 | 0,5 | 54 |
M 80x2 | 115 | 105 | 10 | 16 | 4 | 1 | 57,6 |
M 85x2 | 120 | 110 | 10 | 16 | 4 | 1 | 68 |
M 90x2 | 130 | 120 | 10 | 16 | 4 | 1 | 84,3 |
M 95x2 | 135 | 120 | 12 | 16 | 5 | 1 | 86 |
M 100x2 | 145 | 130 | 12 | 16 | 5 | 1 | 104 |